Bending and forming is the process of shaping flat metal into a three-dimensional form. We do this work in our factory using press brakes and forming machines. Therefore, you do not need to bend metal on site. In addition, you do not need special tools.

We work with many types of metal. This includes perforated sheets, expanded metal, wire mesh, and solid metal sheets. Moreover, we work with different materials – steel, stainless steel, aluminum, and galvanized steel.

We use three main methods. The method depends on your design and your needs. Here are the methods we use:

Press Braking – We use a press brake to bend metal into angles. This method gives sharp, precise bends. Press braking works well for panels, enclosures, and brackets. For example, we can bend metal from 0.5mm to 10mm thick.

Roll Forming – We use rollers to shape metal into curves and profiles. This method gives smooth, continuous bends. Roll forming is ideal for long panels, channels, and tubes. It also works well for large radius curves.

Stamping – We use a stamping press to form metal into shapes. This method is fast and repeatable. Stamping works well for small parts, brackets, and clips. As a result, it is a good choice for large production runs.

After we shape the metal, we check every piece. First, we measure the angles. Then, we check the curves. Finally, we make sure it meets your specifications. After that, we pack it carefully and ship it to you. Your product arrives ready to install.